Principles of maintenance of cooling towers
Design, selection, installation and commissioning of cooling towers are the main steps in the process of purchasing this equipment. Ensuring the proper operation of chillers and other industrial machinery depends on proper efficiency> cooling tower <. The builders of the cooling tower ensure the successful and optimal performance of the cooling tower under certain conditions. The specific conditions of installation, commissioning and maintenance are the basic principles of cooling tower. The owner of the cooling tower must use this refrigeration equipment according to the conditions of the builders. The correct choice and success of its operation is the responsibility of the owner or his technical representatives, and here are the general points. More important than the design stage and selection of refrigeration equipment is their principled maintenance. The efficiency and effectiveness of a refrigeration source such as a cooling tower and chiller is highly dependent on how it works.
Proper operation of an industrial equipment will be ensured when maintenance operations are carried out on a regular and principled basis. The maintenance of the cooling tower involves several steps, the observance of which can have a significant impact on the stability of the system efficiency. Failure to follow the basic points in maintaining and maintaining the cooling tower will cause its proper efficiency to decrease. Decreased efficiency in the cooling tower increases the temperature of the cold water and disrupts the condenser of other devices. If the cooling tower is used in industry, production efficiency will be reduced. Even if the tower is used to cool the chiller, by reducing its efficiency, the chiller will not function properly. The performance of a system is like an hour, and if each component is not efficient, the overall performance will be different.
Principles of maintenance of cooling towers
Periodically inspect the internal components and check the operation of each of the internal components of the cooling tower
Wash interior parts including nozzles, packings and water storage tanks
Adjust the balance of the fan blades and check the impeller performance (no vibration, good air suction
Regular emptying of trash nets in the pan
Regular washing of air filters, if any
Hard resin resuscitation installed in compensatory water circuit if any
Replacement of water purifier filters in floating water circuit
Control the amount of solutes in the pan and reduce it by adjusting the flow and purifying the rotating water
Control the piping and plumbing system regularly and prevent further leaks and breakdowns
Observe the water level of the water pan (If you see a decrease in the water level, check the floating water and temporarily cut off the flow.)
Permanent check of engine temperature and check its consumption amp and compare it with the name amp indicated on the device plate
Check the manual or automatic adjustment of the downstream or blue flow
Drain the tap water in cold seasons and when the cooling tower is off
Regular and periodic service by the experts of the manufacturer during the after-sales service period
The need to follow basic tips in maintaining the cooling tower
Increase the lifespan of internal components due to periodic control and inspection
Increasing the working efficiency of the cooling tower due to the correct operation of the internal components
Reduce water and electricity consumption due to the proper functioning of the water spray system and aeration system
Reduction of sedimentation of internal parts and connecting pipes between cooling towers and other equipment such as chillers and ...
Reduction of costs due to replacement of internal parts due to basic maintenance of the device
Reducing the cost of replacing filter filters with periodic washing of internal components such as packing
